超声波清洗机的应用范围很广，几乎每个行业都可以使用超声波清洗机，但对于非专业人士来说，一旦超声波清洗机的使用出现问题，他们就会不知所措，只能联系厂家处理，这必然会对生产进度产生一定的影响。 针对这种情况，总结了以下几点，对一些简单故障的排查和处理有帮助。
the application range of ultrasonic cleaning machines is very wide, and almost every industry can use ultrasonic cleaning machines. however, for non professionals, once problems arise during the use of ultrasonic cleaning machines, they will be at a loss and can only contact the manufacturer for treatment, which will inevitably h**e a certain impact on production progress. in response to this situation, the editor has summarized the following points, which are helpful for troubleshooting and handling some **faults.
超声波清洗机在使用过程中突然停止，一般可能会有以下几种情况：
during the use of the ultrasonic cleaning machine, if it suddenly stops, the following situations may occur:
1.过流保护：此时，您只需要调整超声波电流即可恢复正常工作状态。
1. overcurrent protection: at this time, simply reduce the ultrasonic current to restore normal working conditions.
2、超温保护：检查散热风扇是否正常工作，清理机箱内的灰尘，然后在保证清洗效果的前提下，适当降低超声波电流，尽可能降低设备的发热。
2. over temperature protection: check if the cooling fan is working properly, clean the dust inside the chassis, and then, while ensuring the cleaning effect, appropriately reduce the ultrasonic current to minimize the heat generation of the device.
3、如果超声波发生器中有元件烧坏，可以先检查保险丝，如果有损坏，更换保险丝并重新开始试验，如果仍然不能恢复正常运行，则需要电气专业人员检测超声波发生器中的元件，更换损坏的元件。
3. if any components inside the ultrasonic generator are burnt out, you can first check the fuse tube. if there is any damage, replace the fuse tube and restart the test. if it still cannot resume normal operation, electrical professionals need to inspect the components inside the ultrasonic generator and replace the damaged components.
4、打开超声波发生器底盘上盖，看线路是否有虚连接，重新拧紧所有线路。
4. open the upper cover of the ultrasonic generator case and check for any loose connections in the wiring. all wiring can be re tightened.
5、如果超声波换能器脱胶或损坏，这种情况只能与厂家沟通，返厂处理。
5. the ultrasonic transducer is detached or damaged, and this situation can only be communicated with the manufacturer and returned to the factory for handling.