众所周知，氧气具有化学反应性。 除了稀有气体和金、铂、银等反应性较低的金属元素外，大多数元素都能与氧气发生反应，氧气具有可燃性和氧化性。 由于氧气的化学性质，氧气加压设备必须以安全、防爆、无油的设计方式进行设计。
as is well known, the chemical properties of oxygen are relatively active. except for rare gases and low activity metal elements such as gold, platinum, and silver, most elements can react with oxygen, which has combustion and oxidation properties. due to the chemical properties of oxygen, oxygen boosting equipment must be designed in a safe, explosion-proof, and oil-free manner.
京拓牌大流量氧气增压充填设备的开发解决了氧气充填或加压过程中遇到的问题，采用两台二次泵并联使用，加上氧气增压泵的核心部件进行特殊处理，可以达到：高效、节能、安全为一体的充填方式，更好地满足客户对充填和增压的需求。
the development of jingtuo brand high flow oxygen boosting filling equipment has effectively solved the problems encountered during the filling or boosting process of oxygen. it uses two two-stage pumps in parallel, and the core component oxygen boosting pump is specially treated to achieve an efficient, energy-s**ing, and safe filling method, better meeting the filling and boosting needs of customers.
氧气加压设备的原理。
the principle of oxygen boosting equipment
京拓牌JTD氧气增压泵系列是一种两级增压泵，可以在极低的压力下将氧气增加到非常高的压力。 驱动气体为 8 bar，氧气入口的压力范围为 05-10bar，可增至30MPa。 整个氧气增压泵由铝合金和不锈钢制成。 该系列的驱动活塞直径为160毫米，泵头两端采用风冷排气。 它可以使氧气增压泵在工作时温度不会太高。 并且驱动空气释放后可以有效利用。
the jingtuo brand jtd oxygen booster pump series is a two-stage booster pump that can increase extremely low pressure oxygen to very high pressure. the driving gas is ≤ 8bar, and the pressure range of the oxygen input port is 0.5-10bar, which can increase to 30mpa. the entire oxygen booster pump is made of aluminum alloy and stainless steel. the driving piston diameter of this series of pumps is 160mm, and both pump heads are equipped with exhaust cooling. it can prevent the temperature of the oxygen booster pump from being too high during operation. and after driving the release of air, it can be effectively utilized.
氧气充注系统参数（仅供参考，产品详情请咨询销售工程师）。
oxygen filling system parameters
驱动气压：3-8 bar
drive air pressure: 3-8bar
进气压力范围：05-10bar
inlet pressure range: 0.5-10bar
输出压力范围：0-30MPa
output pressure range: 0-30mpa
输出流量：380L以上
output flow rate: 380l/min
驱动口G1 2，进氧口Zg1 2，高压出口ZG1 4（可根据客户要求定制）。
drive port g1/2, oxygen inlet zg1/2, high-pressure outlet zg1/4 (can be customized according to customer requirements)