气动气体增压器-气体增压泵-气压泵简介：
introduction to pneumatic gas booster gas booster pump gas pressure pump:
精拓泵采用帕斯卡的工作原理，即驱动气体的工作面积与加压介质气缸面积的比值由驱动气体的工作面积与加压介质气缸面积的比值组成。 面积比值越大，形成的压力越大。 驱动块面积 驱动压力=加压缸体面积 加压介质压力。
the jingtuo pump adopts the working principle of pascal, which is to push a large area to a small area. the ratio of the working area of the driving gas to the area of the pressurized medium cylinder forms the ratio of the driving gas pressure to the pressure of the pressurized medium. the larger the ratio of area, the greater the pressure formed. drive cylinder area × drive pressure=area of pressurized cylinder block × pressure of pressurized medium
气动气体增压器-气体增压泵-气压泵技术参数：
technical parameters of pneumatic gas booster gas booster pump gas pressure pump:
压力范围：0 30MPa
pressure range: 0-30mpa
控制方式：手动控制操作，控制方式：手动控制操作，连接方式：螺纹连杆。
connection method: threaded connection
增压驱动：1-8公斤压力气源。
boosting drive: a pressure air source of 1-8 kilograms
高压气体进出气口连接：ZG1 2、ZG1 4内螺纹连接。
high pressure gas inlet and outlet connection method: zg1/2, zg1/4 internal thread connection.
气动气体增压器 - 气体增压泵 - 气体压力泵**：
picture of pneumatic gas booster gas booster pump gas pressure pump:
气动气体增压器-气体增压泵-气体增压泵摘要：
summary of pneumatic gas booster gas booster pump gas pressure pump:
体积小，重量轻，操作方便，密封寿命长，连续启停无限制。 自冷却，驱动端排出的低温高压气体作为冷却介质进入增压端的冷却室，利用其中的吸热膨胀来冷却气缸和高压端的高压气体输出。 密封性能好，无需油润滑，驱动缸与增压缸完全分离，确保压缩介质不受驱动气体污染。 气体驱动，安全，无火花，确保在易燃易爆场所安全使用。 压力范围宽，输出气体压力可无级调节，压缩介质进出口压力适用范围宽，气体140MPa。
small in size, light in weight, easy to operate, long in service life of sealing components, and unlimited continuous start stop. self cooling, the low-temperature and high-pressure gas discharged from the driving end is used as a cooling medium to enter the cooling chamber of the boosting end, and it absorbs heat and expands inside to cool the high-pressure cylinder and output high-pressure gas. good sealing performance, oil-free lubrication, complete separation between the driving cylinder and the booster cylinder, ensuring that the compression medium is not contaminated by the driving gas. gas driven, safe and spark free, ensuring safe use in flammable and explosive environments. wide range of pressurization, stepless adjustment of output gas pressure, and wide applicability to the inlet and outlet pressure of compressed media, with a gas pressure of 140mpa.