经过几十年的快速发展，我国工业早已处于世界领先地位，在其领域对各种气体源的应用越来越多，今天说说氧气是其中一种特殊气体，氧气**有多种方式，但只能分为高压氧源（钢瓶高压氧气压力13MPa）和低压氧源（各种制氧机压力一般为0.）。2-0.6MPa）。 下面将向您介绍如何将氧气压力提高到复合使用的压力。
after decades of rapid development, china's industry has long been leading the world, and the application of various gas sources in its field is increasing. today, the editor will talk about one of the special gases, oxygen. oxygen can come from various sources, but can only be divided into high-pressure oxygen sources (steel cylinder high-pressure oxygen 13mpa pressure) and low-pressure oxygen sources (various oxygen concentrators generally h**e pressures between 0.2 and 0.6mpa). below we will introduce how to increase the oxygen pressure to the pressure for composite use.
增氧基本上是使用气动增氧泵，其安全性可以是安全防爆的，因为它是由气体驱动的，没有电火花。 氧气在工业中的作用大致可分为普通级和食品级，如制氧、制氧等均为普通级，食品级有药用氧气保护、氧气净化等。 在此给大家简单介绍一下其两型氧气增压泵的区别，普通液位的氧气加压压力过高而无法满足油液会导致**，精拓出厂时会经过特殊的脱脂和无油处理工艺。 食品级氧气增压泵采用304食品级不锈钢材料，由于卫生局规定金属的加压接触氧部分采用304食品级不锈钢，有效防止氧化和二次污染2-0.将 8 MPa 的氧气加压至 80 MPa，但不建议超过 30 MPa。 对于高压氧气瓶，有两种选择：京拓JTA系列或京拓JTD系列，两者的主要区别在于加压后的流量，如果不能满足JTD系列，则可以并联多个单元。
oxygen boosting is basically achieved by using pneumatic oxygen boosting pumps, which can be safely explosion-proof due to the use of gas driven non electric sparks. the role of oxygen in industry can be roughly divided into ordinary grade and food grade, such as oxygen cutting, oxygen assisted combustion, etc. are all ordinary grade, while food grade includes pharmaceutical oxygen protection, oxygen blowing, etc. here is a brief introduction to the differences between the two types of oxygen booster pumps. ordinary grade oxygen can cause explosions when the pressure is too high when it comes into contact with oil after being boosted. jingtuo will undergo a special process for degreasing and oil-free treatment when it le**es the factory. food grade oxygen booster pumps are all made of 304 food grade stainless steel material, which is required by the health bureau to increase the pressure of the metal in contact with oxygen. this effectively prevents oxidation and secondary pollution. for low-pressure oxygen sources, precision expansion two-stage booster pumps can be used to increase the original low-pressure oxygen from 0.2 to 0.8 mpa to 80 mpa, but it is not recommended to exceed 30 mpa. there are two options for high-pressure oxygen cylinders: jingtuo jta series or jingtuo jtd series. the main difference between these two is the flow rate after pressurization. if one jtd series cannot meet the requirements, multiple cylinders can be connected in parallel.
对于氧气增压，建议客户选择30MPa以上和密闭空间的气动氧气专用增压泵，因为超过30MPa的氧气在性质上极不稳定，非常容易遇到油和电火花。
for oxygen boosting, it is recommended that customers choose pneumatic oxygen specialized booster pumps for spaces exceeding 30mpa and enclosed spaces, as oxygen exceeding 30mpa is highly unstable and prone to explosion in the presence of oil and electric sparks.