力士乐伺服驱动器灯闪光维修
f218 heatsink overtemperature shutdown
散热器过热并关闭。
description： 描述：
the temperature of the dkc heatsink will be monitored. if the temperature of the heatsink is too high, the drive will power down in order to protect against damage.将监控 DKC 散热器的温度。 如果散热器温度过高，驱动器将按顺序关闭电源以防止损坏。
力士乐力士乐不常见故障解决：
原因： 原因：
1. ambient temperature is too high. the specified operational data is valid up to an ambient temperature of 45°c.环境温度过高。 规定的运行数据在 45°C 的环境温度下有效。
2. the dkc's heatsink is dirty.DKC 的冷却器脏了。
3. air flow is prevented by other assembly parts or a control cabinet panel assembly.气流被其他装配部件或控制柜面板组件阻挡。
4.heatsink blower may be defective.
散热器鼓风机可能有故障。
补救措施： 解决方法：
1. reduce the ambient temperature; for example, through cooling of the control cabinet.
降低环境温度;例如，通过冷却控制柜。
2. remove any obstruction or dirt from the heatsink.
清除散热器上的任何障碍物或污垢。
3. install the device vertically and clear a large enough area for proper heatsink ventilation.垂直安装设备，留出足够的散热和通风空间。
4. exchange drive.交换驱动器。